Need help?Do you have a question about the Polaris PROSPECTOR PRO and is the answer not in the manual?
General| Brand | Polaris |
|---|---|
| Model | PROSPECTOR PRO |
| Material | Steel |
| Color | Black |
| Compatibility | Polaris PROSPECTOR |
| Installation | Bolt-on |
Emphasizes reading manual and following safety for operation.
Outlines essential checks of the track system and vehicle before use.
Guidelines for safe operation, weight limits, and 4x4 mode.
Safe operation guidelines for speed, terrain, and snow driving.
Introduces the initial installation of the track system.
Details steps for re-installing the track system onto the vehicle.
Step-by-step instructions for removing the track system.
Explains how to set the correct angle of attack for front track systems.
Details the procedure for adjusting the front track angle of attack.
Provides steps to obtain the correct angle of attack for rear track systems.
Details the procedure for adjusting the rear track angle of attack.
Outlines how to inspect the alignment of front track systems.
Explains how to adjust the front track system alignment.
Describes steps to adjust track system alignment.
Explains how to measure and adjust rubber track tension.
Details the procedure for adjusting rubber track tension.
Provides basic steps for installing the rubber track.
Explains the break-in period and required inspections for new track systems.
Covers inspection and maintenance of track system components.
Introduces lubrication and details wheel bearing seal lubrication.
Introduces wear inspection for wheels, tires, and sprockets.
Guides on inspecting wheels and urethane tires for wear.
Details how to measure and identify sprocket wear.
Explains inspecting track guides for wear and replacement.
Guides on inspecting the track for wear and damage.
Details inspection of the anti-rotation system, especially the ball joint.
Lists causes and corrections for abnormal vibration.
To Next Page
