Polaris 2879790 User Manual

APPLICATION
Polaris RMK, Switchback and RMK Assault
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering
information.
KIT CONTENTS
This Kit includes:
REF QTY PART DESCRIPTION PART NUMBER
1 4 Carriage Bolt, M6 - 1.0 X 20mm
-
2 4 Flat Washer, M6
-
3 4 Handle, M6
-
4 1 Male Buckle, 38mm
-
5
2 Main Plate
-
6 2 Side Plate
-
Instr 9924828 Rev 02 2016-08 Page 1 of 3
P/N 2879790
ADJUSTABLE GAS CAN HOLDER KIT

Polaris 2879790 Specifications

General

Brand	Polaris
Model	2879790
Category	Offroad Vehicle
Language	English

Summary

Application

Before You Begin

Kit Contents

Tools Required

Assembly Time

Installation Instructions

Insert Carriage Bolts

Insert four carriage bolts into the tunnel grooves, two on each side.

Insert Main Plates

Insert main plates into the tunnel, aligning bolts in adjustment slots.

Insert Side Plates

Insert side plates into the main plates.

Install Washers and Handles

Install four washers and four handles; do not tighten them firmly.

Install Buckle and Strap

Install male buckle on strap and attach strap using female buckle assembly to main plates.

Position and Tighten Plates

Place can between plates, center it, and tighten plates using handles.

Adjust Straps

Adjust straps according to the size of the gas can.