Polaris 4X4 700 EFI

68
MAINTENANCE
Engine Oil
Oil and Filter Change
1. Remove the dipstick and fill the sump with two quarts (1.9 l) of rec-
ommended oil.
2. Shift the transmission to neutral.
3. Engage the park brake.
4. Apply the brakes. Start the engine. Allow it to idle for one to two
minutes.
5. Stop the engine. Inspect for leaks.
6. Re-check the oil level on the dipstick and add oil as necessary to
bring the level to the upper mark on the dipstick.
7. Dispose of used filter and oil properly.
Gearcases
Gearcase Specification Chart
Gearcase Lubricant Capacity Fill Plug
To r q u e
Drain Plug
To r q u e
Main Gearcase
(Transmission)
Premium AGL
Synthetic
Gearcase Lube
15.2 oz.
(450 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)
Front Gearcase Premium Demand
Drive Hub Fluid
5 oz.
(150 ml)
8-10 ft. lbs.
(11-13.6 Nm
11 ft. lbs.
(15 Nm)
Middle Gearcase
(6X6)
Premium ATV
Angle Drive Fluid
6.75 oz.
(200 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)
Rear Gearcase
(4X4)
Premium ATV
Angle Drive Fluid
18 oz.
(532 ml)
40-50 ft. lbs.
(54-68 Nm
30-45 in. lbs.
(3-5 Nm)
Rear Gearcase
(6X6)
Premium ATV
Angle Drive Fluid
10 oz.
(300 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)