35
OPERATION
Starting the Engine
8. After the engine starts, push the choke knob in half way.
9. Vary the engine RPM slightly with the throttle to aid in warm up
until the engine idles smoothly.
10. Push the choke knob in.
Stopping the Engine
1. Release the throttle pedal completely and brake to a complete stop.
2. Turn the engine off.
3. Engage the park brake.
Braking
1. Release the throttle pedal completely.
2. Press on the brake pedal evenly and firmly.
NOTE: Practice starting and stopping (using the brakes) until you're familiar
with the controls.
NOTE: When the throttle pedal is released completely and the engine speed
drops near an idle, the vehicle has no engine braking.
CAUTION
Operating the vehicle immediately after starting could cause engine damage.
Allow the engine to warm up for several minutes before operating the vehicle.
WARNING
A rolling vehicle can cause property damage and serious injury. Always
engage the park brake after stopping the engine.
WARNING
Failure to allow for increased braking distance when hauling cargo or towing
a trailer may result in accident and injury. Always slow down and allow
additional braking distance when towing or hauling cargo.
To Next Page
Loading...
Need help?
General
