Polaris 550 Indy 2022 User Manual

THROTTLE BLOCK ALIGNMENT
CAUTION
Take care to avoid damaging hand warmer/brake switch wires when moving
components.
1. Slightly loosen the set screw
q
on the bottom of the housing.
2. Move the control block to the desired position.
3. Tighten the screw to specification. Do not over-torque.
TORQUE
Set Screw
35 in-lbs (4 N·m)
4. With the engine off, test throttle lever movement after tightening the screw.
See page 63.
47
THE PERFECT FIT
Downloaded from ManualsNet.com search engine

Polaris 550 Indy 2022 Specifications

General

Brand	Polaris
Model	550 Indy 2022
Category	Offroad Vehicle
Language	English