36
FEATURES
Instrumentation
MFD Digital Display Programs
Performance Program
Clock Setting
1. While in the CLOCK display, press
and hold the SET button for five
seconds.
2. When the hour starts flashing press
the SET switch once to advance
one hour, or press and hold the
SET button to advance the hour
once every 0.2 seconds.
3. Press the MODE button to save the hour and flash the minutes.
4. Set the minutes in the same manner.
5. When finished, press the MODE button to save the new setting.
NOTE: If the MODE button is not pressed within ten seconds, the clock
will automatically save the new entry.
To Next Page
Loading...
Need help?
General
