36
THE PERFECT FIT
Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for controlling weight trans-
fer during acceleration is by adjusting the rear rear
scissor stop. Use the scissor stop tool located in
your tool kit to make the adjustments.
To decrease weight transfer under acceleration (for
improved cornering), rotate the stop to a higher
position.
To increase weight transfer or ski lift during acceleration, move the stop
to the rearward upper position. The stop may also be rotated to a lower
position for even more weight transfer if desired.
Low Position - This setting will
increase weight transfer.
Medium Position - This setting is
the production setting and will pro-
vide the best overall trail riding.
High Position - This setting will
decrease weight transfer.
Rearward Upper Position
(optional hole location) - This set-
ting will increase weight transfer.
TIP:Your dealer can help you with initial
setup and additional setup instruc-
tions to help you achieve your opti-
mum ride.
To Next Page
Loading...
