79
MAINTENANCE
Lubrication
n Chaincase Oil
Oil Change
1. Position the vehicle on a level surface.
2. Place a drain pan under the drain plug. Remove the drain plug.
Allow the oil to drain completely.
3. Clean off all metal shavings from the plug. Install a new sealing
washer on the drain plug.
TIP: The sealing surfaces on the drain plug and the oil tank should be clean and
free of burrs, nicks or scratches.
4. Reinstall the drain plug. Torque to 6-10 ft. lbs. (8-13 Nm).
5. Remove the fill plug. Clean off all metal shavings from the plug.
6. Using a funnel, slowly add the recommended oil until the fluid
begins to overflow. Fluid capacity is 9 oz. (266 ml).
7. Wipe the fill area with a clean cloth.
8. Reinstall the fill plug. Torque to 6-10 ft. lbs. (8-13 Nm).
To Next Page
Loading...
