Polaris 600 Switchback 2016 User Manual

60
THE PERFECT FIT
Handlebar Adjustments
Riser Angle
Riser angle can be adjusted to suit rider preference. Factory settings are
shown below.
1. Loosen the four bolts on the bottom of the adjuster block. If
necessary, pry the blocks apart with a screwdriver.
2. Adjust the riser forward or rearward to the desired position.
3. Tighten the bolts to 14.8 ft-lbs (20 Nm).
PRO-S Models - 0° PRO-X Models - 11° Forward

Polaris 600 Switchback 2016 Specifications

General

Brand	Polaris
Model	600 Switchback 2016
Category	Offroad Vehicle
Language	English