PRE-RIDE SUSPENSION INSPECTION
Loose nuts and bolts can reduce your snowmobile's reliability and cause
needless repairs and down time. Before beginning any snowmobile trip, a visual
inspection will uncover potential problems. Check the following items on a
weekly basis or before any long trip.
ITEM SEE SECTION
Check suspension mounting bolts for
tightness.
-
Check rear idler wheel bolt for
tightness.
page
Check rear idler adjusting bolt
locknuts for tightness.
-
Check front torque arm limiter strap
condition.
-
Check rail slide condition. page 161
Check track tension.
page
Check ski runner/skag condition. page 159
Check ski spindle bolts for tightness.
-
Check tie rod end nuts for tightness.
-
108
PRE-RIDE INSPECTIONS
To Next Page
Loading...
