TROUBLESHOOTING
ENGINE TROUBLESHOOTING
Unless you have experience and training in two-cycle engine repair, your dealer
can assist if technical problems arise.
PROBLEM PROBABLE CAUSE SOLUTION
Erratic engine
operating RPM
during
acceleration or
load variations
Drive clutch binding Your dealer can perform
this service.
Driven clutch malfunction Your dealer can perform
this service
Harsh drive
clutch
engagement
Drive belt worn or too
narrow
Replace the drive belt.
Excessive belt/sheave
clearance
Your dealer can perform
this service.
Drive belt turns
over
Wrong belt for application Replace the drive belt.
Clutch alignment out of
spec
Your dealer can perform
this service.
Engine mount broken or
loose
Inspect and replace.
Your dealer can perform
this service.
Machine fails to
move
Clutch jammed Check for twisted belt or
broken spring. Your dealer
can perform this service.
Track jammed
• Foreign object may be
caught or the rail slide
melted to the track clips
due to lack of lubrication.
• Track may be iced up or
frozen to the ground.
Chaincase sprocket or
chain jammed or broken
Chain is loose or broken or
chain tightener is loose.
Your dealer can perform
this service.
215
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
