DIAGNOSTIC TROUBLE CODES (DTCS) – MATRYX
SPN = SUSPECT PARAMETER NUMBER / FMI = FAILURE MODE INDICATOR
TROUBLE CODE SPN FMI
P-COD-
E
CONDITION
Exhaust Valve
Learning Default
Position
520337 7 P3036 This trouble code sets if the Exhaust Valve
Learn values are different from the
Exhaust Valve Check Values. Can be
caused by an obstruction in the Exhaust
Valves, Broken Cable, or broken Exhaust
Valve.
Water Temperature
Unrealistic
Transition
110 10 P0119 This trouble code sets if the water
temperature changes by 20C in 1 sec 3
times. Can be caused by Faulty Wiring,
Faulty Water Temperature Sensor, or
Faulty ECU.
203
DIAGNOSTIC TROUBLE CODES (DTC)
To Next Page
Loading...
Need help?
General
