PROBLEM PROBABLE CAUSE SOLUTION
Noise in drive
system
Broken drive clutch
components
Your POLARIS dealer can
assist..
Bearing failure/ chaincase,
jackshaft, or front drive
shaft
Your POLARIS dealer can
assist..
Drive belt surface flat spots Inspect and replace as
needed.
Drive chain loose or worn,
sprocket teeth broken
• Inspect and adjust, or
replace.
• Your POLARIS dealer
can assist..
Sheared teeth on
QUICKDRIVE belt
Replace QUICKDRIVE belt.
Harsh drive
clutch
engagement
Worn or narrow belt Replace the drive belt.
Excessive belt/sheave
clearance
Your POLARIS dealer can
assist.
Drive belt turns
over
Wrong belt Replace the drive belt.
Clutch alignment out of
spec
Your POLARIS dealer can
assist.
Engine mount broken or
loose
Inspect and replace. Your
POLARIS dealer can
assist..
219
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
