Polaris 800 PRO RMK User Manual

57
PRE-RIDE INSPECTIONS
Pre-Ride Suspension Inspection
Loose nuts and bolts can reduce your snowmobile's reliability and cause
needless repairs and down time. Before beginning any snowmobile trip,
a visual inspection will uncover potential problems. Check the
following items on a weekly basis or before any long trip.
Item See Page
Check suspension mounting bolts for tightness. --
Check rear idler wheel bolts for tightness. 107
Check rear idler adjusting bolt locknuts for tightness. --
Check front torque arm limiter strap condition. --
Check rail slide condition. 112
Check track tension. 106
Check ski runner/skag condition. 111
Check ski spindle bolts for tightness. --
Check tie rod end nuts for tightness. --

Polaris 800 PRO RMK Specifications

General

Bore x Stroke	85 mm x 70 mm
Cooling	Liquid
Ignition	DC CDI
Rear Suspension	RMK rear suspension
Track Width	15 in
Track Length	155 inches
Fuel Delivery	Electronic Fuel Injection (EFI)
Brake	Hydraulic disc
Height	48 in