Polaris 800 PRO RMK User Manual

64
OPERATION
Starting the Engine
Restarting an Engine
If the rider stops the engine by pushing the engine stop switch down,
restart the engine using the normal starting procedure. If the engine fails
to start using the normal procedure:
1. Push the engine stop switch down to the OFF position.
2. Turn the key to the OFF position.
3. With both switches OFF, squeeze and hold the throttle in the wide
open position.
4. Crank the engine several times to clear the engine.
5. Release the throttle.
6. Restart the engine using the normal starting procedure.

Polaris 800 PRO RMK Specifications

General

Bore x Stroke	85 mm x 70 mm
Cooling	Liquid
Ignition	DC CDI
Rear Suspension	RMK rear suspension
Track Width	15 in
Track Length	155 inches
Fuel Delivery	Electronic Fuel Injection (EFI)
Brake	Hydraulic disc
Height	48 in