Polaris 800 PRO RMK User Manual

83
MAINTENANCE
Hood/Side Panel
The hood and side panels of the
snowmobile protect the operator
from moving parts. Never
operate a snowmobile with the
hood or side panels open or
removed. Always ensure that
the hood and side panels are
securely in place before starting
the engine.
To open a side panel, rotate the
two 1/4-turn fasteners at the
upper edges of the side panel.
Release the side panel strap at
the lower edge of the panel.
To remove an open side panel,
pull the panel outward to release
the tabs at the lower edge of the
panel.
Removing the hood is not recommended. Any service requiring the
removal of the hood should be performed by an authorized POLARIS
dealer.
Strap
1/4-Turn Fasteners

Polaris 800 PRO RMK Specifications

General

Bore x Stroke	85 mm x 70 mm
Cooling	Liquid
Ignition	DC CDI
Rear Suspension	RMK rear suspension
Track Width	15 in
Track Length	155 inches
Fuel Delivery	Electronic Fuel Injection (EFI)
Brake	Hydraulic disc
Height	48 in