Polaris 800 PRO RMK User Manual

86
MAINTENANCE
Lubrication
Driveshaft Bearing (RMK/ASSAULT RMK)
Inject grease into the fitting on the
speedometer sensor housing until
grease purges from the seal on the
inside of the tunnel. This should take
approximately two pumps. Do not use
more than four pumps.
Fitting

Polaris 800 PRO RMK Specifications

General

Bore x Stroke	85 mm x 70 mm
Cooling	Liquid
Ignition	DC CDI
Rear Suspension	RMK rear suspension
Track Width	15 in
Track Length	155 inches
Fuel Delivery	Electronic Fuel Injection (EFI)
Brake	Hydraulic disc
Height	48 in