FINAL DRIVE
7.19
11. Install output cover with new o-ring and torque
bolts to 14 ft. lbs. (19 Nm).
Cover Bolts Torque
14 ft. lbs. (19 Nm)
12. Install new seals into the gearcase housing and
gearcase housing cover.
13. Install the drain plug and torque the drain plug to
14 ft.lbs. (19 Nm).
14. Set the gearcase on a level surface. Remove the
fill plug and fill the gearcase with 5 oz. (150 ml.) of
Premium Drive Hub Fluid (PN 2871654). Torque
the fill plug to 14 ft. lbs. (19 Nm).
Fill plug
Drain plug
FRONT GEARCASE 4X4
14 ft.lbs. (19 Nm)
Premium Demand Drive Hub Fluid
(PN 2871654)
To Next Page
Loading...
