FINAL DRIVE
7.60
2. Install the pinion shaft into the differential housing.
3. Replace the pinion shaft cover O--ring and install
the cover. Install the four pinion shaft cover bolts
and torque the bolts to 20 ft. lbs. (27 Nm).
Pinion Gear Cover
New O--ring
20 ft.lbs.(27 Nm)
Pinion Shaft Cover Bolt Torque:
20 ft. lbs. (27 Nm)
4. Install the wave spring into the differential
assembly. Be sure to properly seat the wave
spring into the dif ferential.
5. Reinstall the the output shaft and ring gear.
To Next Page
Loading...
