Polaris AfterDark AD151 User Manual

6. Insert the fiber manifold into the installation base from the bottom and secure it at the top
with the manifold nut.
7. Place the installation base over the ends of the fiber optic conduits while guiding the
electrical conduit through the smaller hole.
8. Backfill dirt around the installation base to secure it. Ground level should be at least 1"
below the top of the base.
www.polarispool.com
Installation Base
Fiber Optic
Cables
Fiber Manifold
Installation Base
Manifold Nut
Side View
1" below
top of base
Fill dirt line

Polaris AfterDark AD151 Specifications

General

Brand	Polaris
Model	AfterDark AD151
Category	Lighting Equipment
Language	English