107
MAINTENANCE
Lubrication Recommendations
10. Front
Drive Axle (U
Joint) (AWD
Models)
Grease+ Locate grease fitting and
grease with grease gun.
Every 3
months or
50 hours
11. Ball Joint L
Grease
**
Locate fitting on back side of
struts and grease with grease
gun.
Every 3
months or
50 hours
12. Front A
Arm Pivot
Shaft
L
Grease
**∆
Locate fitting on pivot shaft
and grease with grease gun.
Every 3
months or
50 hours
13. Counter
Balance
Housing (400)
SAE
10/30
Check level on dipstick and
add oil as necessary.
Change annually. To change
oil see page 149.
Check
monthly
and
change
annually
14. Steering
Post Bushings
L
Grease
**
Locate fittings on steering
post and grease with grease
gun.
Every 3
months or
50 hours
To Next Page
Loading...
