119
MAINTENANCE
Steering Insp ectio n
The steering assembly of the machine should be checked periodi-
cally for loose nuts and bolts. If loose nuts and bolts are found,
have your dealer tighten them before riding your vehicle.
Camber and Caster
The camber and caster are non-adjustable.
Toe Alignment
You can check the toe
alignment of the vehicle
using the following meth-
od. The recommended
toe alignment is 1/8″ to
1/4″ (.3to.6cm)toeout.
If you discover improper
adjustment have your
dealer correct it.
1. Set the handlebars in
a straight ahead posi-
tion and hold them in
this position.
Do not attempt to adjust the tie rod for toe alignment. Severe
injury or death can result from improper adjustment. Contact
your Polaris dealer. He/she has the training and tools to make
these adjustments.
To Next Page
Loading...
