Polaris ATV 2001 User Manual

120
MAINTENANCE
Toe Alignment (cont.)
2. Place stands in front of the machine, perpendicular to the rear
tires.
3. Tie an elastic string around the stands, making sure string just
touches side surface of the rear tires on each side of machine
and goes around the stands in front of the machine.
4. Measure from string to rim at front and rear of front rim. Rear
rim measurement should be 1/16″ -1/8″ (.2 to .3 cm) more than
front rim measurement.
5. If this measurement needs to be adjusted, contact your dealer
for service.

Polaris ATV 2001 Specifications

General

Brand	Polaris
Model	ATV 2001
Category	Offroad Vehicle
Language	English