113
MAINTENANCE
The following items should be checked occasionally for tightness;
or if they have been loosened for maintenance service.
Wheel Nut Torque Specifications
Bolt Size Specification
Front 3/8″ 20 Ft. Lbs.
Rear 3/8″ 20 Ft. Lbs.
Rear 1/2″ 50 Ft. Lbs.
NOTE: All nuts that have a cotter pin installed must be ser-
viced by an authorized Polaris Dealer.
Front Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical
component operations. Service work must be performed by your
authorized Polaris dealer.
To Next Page
Loading...
