45
CONTROL AND PARTS FUNCTIONS
Parking Brake
Setting the Parking Brake - A
1. Squeeze the left hand brake
lever two or three times and
hold it.
2. Rotate the park brake lock (1)
into the notches on the mas-
ter cylinder body. Release
the brake lever.
3. To release the parking brake
lock, squeeze the brake le-
ver. It will return to its re-
leased position.
Always check to be sure that the parking brake has been dis-
engaged before operating the ATV. An accident could result
causing severe injury if the parking brake is left on while the
ATV is operated.
1
To Next Page
Loading...
