116
MAINTENANCE AND LUBRICATION
Lubrication
Oil Filter and Change (Cont.)
Xpedition 425
12. Remove dipstick and fill sump with 5.5 quarts (5.2 l) of Polaris
Premium 4 synthetic oil.
13. Shift machine into neutral and set parking brake.
14. Start the engine and let it idle for one to two minutes. Stop the
engine and inspect for leaks.
15. Re-check the oil level on the dipstick and add oil as necessary to
bring the level to the upper mark on the dipstick.
16. Dispose of used filter and oil properly.
NOTE: Drain Plug Torque: 14 ft. lbs. (19 Nm); Oil Filter Torque: Turn
by hand until filter gasket contacts the sealing surface, then turn an
additional 1/2 turn.
To Next Page
Loading...
Need help?
General
