107
MAINTENANCE AND LUBRICATION
Lubrication
Steering Nozzle Pivot
Shaft
Lubricate the steering nozzle
shaft pivot connections using
Polaris cable lube PN 2870510.
Steering Handle Pivot
Shaft
Lubricate the handle pivot shaft
and bushing using lubricant PN
2871066. If the steering shaft has
loosened, tighten it.
Choke (if equipped)
Turn the choke lever and apply
Polaris cable lube PN 2870510
to the knob shaft. NOTE: On
some models, the choke is
located on the console.
Seat Latch And Hooks
Grease the locking mechanism of the seat latch at the rear of the seat
opening.
Carburetor And Oil Injection Pump
Greas e springs, exposed portions of cable and shafts at the
carburet or(s) or throttle bodies. Grease often if used in salt water.
Electrical Connection s
Apply a dielectri c grease on battery posts and exposed cable
connections (Polaris PN 2871027), supplied with watercraft.
Lubricate
Lubricate
Reverse Gate