90
SPECIAL PROCEDURES
Cleaning
Cleaning The Jet Pump And Impeller
Never attempt to clean the jet
pump intake and impeller while
the engine is running. Always
shut off the engine and remove
the lanyard lock plate from the
engine stop switch.
Clean the jet pump intake and
impeller and flush the cooling
system. Check the screen in the
pump stationary nozzle for
plugging.
Screen
Operation of the engine with the intake system removed could
damage the engine.
CAUTION
Whenever possible avoid running the watercraft in weedy areas. If
this is unavoidable, vary the watercraft speed. Weeds tend to
accumulate more rapidly at steady and trolling speeds.
CAUTION
To Next Page
Loading...
Need help?
General
