52
OPERATION
Pre- Operation Check
Following is a check list that should be performed before riding the
watercraft. The next few pages contain detailed information regarding
these checks.
Item What To Do See
Page
Fuel/water separator Visually inspect for water and drain if
present
64
Fuel/oil tank levels Check fuel/oil; add as necessary;
visually inspect for presence of water
54
Jet pump water intake Inspect and remove debris if present;
be sure intake grate is secure; push
rear of watercraft up and down in the
water to flush sand out of water in-
take before starting
55
Throttle Check for proper operation. 56
Steering Check for proper operation; visually
inspect control cable
56
Fire extinguisher Inspect condition and expiration date 57
Storage compartment Check for secure latching 58
Engine Cover Check for secure latching 58
Inspect the watercraft each time before starting and riding to
ensure it is in proper working order. If proper inspection is not
done severe injury or death could result. See page 126 for
additional inspection information.
If you smell fuel in the hull of the craft, do not operate the craft.
Instead, t ake i t t o your dealer immediat ely for inspection.
Before inspection, remove lanyard and lock plate from the engine
stop switch located on the handlebars.
WARNING
To Next Page
Loading...
Need help?
General
