EasyManuals Logo

Polaris FREEDOM Plus EB37 Series User Manual

Polaris FREEDOM Plus EB37 Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Page 14
Polaris
®
FREEDOM
PLUS Cordless Robotic Cleaner | Owner’s Manual
Figure 21. Remove and Wash the Filter Canisters
NOTE: Periodically, remove the filter canister and clean
thoroughly with soapy water and a soft bristle
brush
4. Replace the filter canister into the cleaner.
5. Store the cleaner on the charging caddy out of
direct sunlight.
Figure 22. Store Cleaner on the Charging Station
NOTE: We recommend to let the cleaner dry before
being positioned on the charging station.
6.3 Storage
Everyday Storage
Store the cleaner in a protected and dry place with
an ambient temperature between 50°F (10°C) and
70°F (21°C), out of reach of children, pets, other
foreign objects, etc.
Never store or dry the cleaner in direct sunlight.
DO NOT expose cleaner to fire, excessive
temperatures, ignition sources, or pool and spa
chemicals.
DO NOT leave the cleaner in the water when not
in use.
Long-Term & Winter
Remove the cleaner from the pool and drain all
water to avoid freezing water damage (freeze
damage is not covered under warranty).
For long term storage, it is recommended to
store the cleaner at 80-100% of battery capacity
(indicated by solid GREEN battery LED).
You may either:
Leave the cleaner and charging caddy
connected until next use.
Disconnect and recharge the cleaner at the start
of season.
Store cleaner and charging station out of direct
sunlight, rain or inclement weather.
6.4 Replacing Wear Parts
6.4.1 Replacing Brushes
The cleaner is fitted with PVC brushes with a
“wear” indicator.
Raised groove
becomes partially
flattened,
indicating
excessive wear
Figure 23. Worn Brush Indicator
To maintain cleaner performance at its best you
need to replace the brushes as soon as one of the
wear indicators is reached (even if the blade wear
is not even). It is recommended that you replace
the brushes when the rubber is worn down to
the top of the wear indicator (or every two years,
whichever comes first).
To replace a worn brush:
1. Separate the edges of the brush and undo the
tabs. Remove the worn brushes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris FREEDOM Plus EB37 Series and is the answer not in the manual?

Polaris FREEDOM Plus EB37 Series Specifications

General IconGeneral
BrandPolaris
ModelFREEDOM Plus EB37 Series
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals