97
OPERATION
Electronic Reverse (PERC 4t)
Disengaging Reverse
1. Stop the snowmobile and leave the engine idling.
2. Push the yellow reverse button for one second and release. The light
on the instrument panel will shut off.
3. Apply the throttle slowly to make sure the snowmobile is in for-
ward.
n Emergency Stopping
The following chart lists methods for stopping the snowmobile in the
event of an emergency. See page 94 for more information about the
engine stop switch.
SYSTEM WHAT IT DOES
THROTTLE
CONDITION
Ignition Switch Interrupts ignition circuit All
Brake Slows jackshaft All
Engine Stop Switch Interrupts ignition circuit All
To Next Page
Loading...
Need help?
General
