EasyManuals Logo

Polaris FST IQ Cruiser User Manual

Polaris FST IQ Cruiser
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #123 background imageLoading...
Page #123 background image
120
MAINTENANCE
Spark Plugs
A new engine can cause temporary spark plug fouling due to the preser-
vative added during the assembly process. Avoid prolonged idle speeds,
which cause plug fouling and carbonization.
Use recommended spark plugs with the proper gap.
Use only resistor-type spark plugs.
Torque spark plugs to 18-20 ft. lbs. (24-27 Nm).
Check the spark plug firing end condition after the engine has been
warmed up and the vehicle has been driven at higher speeds. If a plug is
fouled, replace the plug with a new plug.
CAUTION
Using non-recommended spark plugs can result in serious engine damage. A
spark plug with a heat range too high will always cause engine damage if the
engine is operated in conditions more severe than intended for that plug.
Always use the spark plugs recommended for your snowmobile.
WARNING
A hot exhaust system and engine can cause serious burns. Wear protective
gloves when removing a spark plug for inspection.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris FST IQ Cruiser and is the answer not in the manual?

Polaris FST IQ Cruiser Specifications

General IconGeneral
BrandPolaris
ModelFST IQ Cruiser
CategorySnowmobiles
LanguageEnglish

Related product manuals