108
MAINTENANCE
Engine Oil
n Oil Level Check
8. Maintain the oil level in
the safe operating range,
between the upper and
lower marks on the dip-
stick. If the level is low,
add the recommended oil
in small increments, about 2 ounces (60 ml), and recheck the level.
If the level is high, remove 2 ounces (60 ml) and recheck the level.
9. Recheck the oil level if oil was added or removed, making sure the
coolant temperature is within the specified range. If necessary, con-
tinue adding or removing oil until the level is in the safe operating
range.
CAUTION
Do not overfill the oil tank. Engine damage may occur. Always add oil in small
increments and recheck the level to avoid overfilling.
Fill mark for oil changes
(at specified coolant temperature)
Safe operating range
To Next Page
Loading...
Need help?
General
