13
3.3 I Con guring the sweep hose
The sweep hose must move slowly. To increase or reduce sweep hose movements:
• Stop the booster pump.
• Rotate the adjus ng screw of the sweep hose to suit the needs.
To reduce movement
To increase movement
3.4 I Se ng the thrust jet
• The default se ng diff ers depending on the cleaner:
P280
P380 P3900 Sport
• The jet is located at the rear of the cleaner and thrusts the cleaner in a given direc on.
• Depending on the cleaner's behaviour, this movement can be changed by adjus ng the rear jet:
Robot behaviour Result
Rear jet
adjustment
The cleaner is in contact with the bo om of
the pool and moves in a straight line
/
The cleaner " ies" around the pool and/or
does not make contact with the pool bo om.
The cleaner turns too far to the right
The cleaner turns too far to the le
When the cleaner reaches the walls, it doesn't
rise and change direc on
To Next Page
Loading...