Polaris P280 User Manual

8
2.4 I Connect the lead hose to the cleaner
2.4.1 P280 and P380
• Remove the a ach clamp from the hose and place it on the cleaner, see picture .
• Fasten the hose on the cleaner, see picture .
• Place the a ach clamp on the hose and screw, see picture .
• Pull on the bag to remove it, see picture .
• A ach the  lter bag clamping clip on the hose, see picture .
• Place the head  oat in accordance with the following indica ons, see picture :
- P280: posi on at a distance of 1.3 to 2.5 cm.
- P380: Fully embed the head  oat.
2.4.2 P3900 Sport
• Fasten the hose connection clips ( ) to the hose on the cleaner ( ).
• Pull on the bag to remove and wrap it around the hose ( ).
• Fasten the bag using the Velcro strips ( ) at the top and bottom.
EN

Polaris P280 Specifications

General

Brand	Polaris
Model	P280
Category	Ultrasonic Jewelry Cleaner
Language	English