101
Driving Safely
Making Turns
Your ATV i s equipped with a solid rear axle, which drives both
rear wheels equally at all times. This means that the wheel on
the outside of the turn must travel a greater distance than the
inside wheel when turning and the inside tire must slip
traction slightly. To turn, steer in the direction of the
turn, leaning your upper body to the inside of the turn
while supporting your weight on the outer footrest.
This technique alters the balance of traction between
the rear wheels, allowing the turn to be made smoothly.
NOTE: Practice making turns at slow speeds.
WARNING
Turning at sharp angles or at excessive speeds can result in vehicle overturn and
lead to serious injury. Avoid turning at sharp angles. Never turn at high speeds.
To Next Page
Loading...
Need help?
General
