120
Maintenance
PVT System
The PVT system rotates at high speeds, creating large amounts of force on clutch
components. Extensive engineering and testing has been conducted to insure the
safety of this product. However, as the owner you have the following responsibilities
to make sure this system remains safe:
Do not modify any component of the PVT system. Doing so may reduce its strength
so that a failure may occur at high speeds. This system has been precision balanced.
Any modification will cause the system to be out of balance, creating vibration and
additional loads on components.
S Routine maintenance is the responsibility of the owner . Always follow recom-
mended maintenance procedures. See your dealer!
S This PVT system is intended for use on Polaris products only.
S The PVT housing must be securely in place during operation.
Failure to comply with this warning can result in severe injury or death.
WARNING
To Next Page
Loading...
Need help?
General
