Polaris PRESTIGE PAG19SF

H0752500_REVB
WARNING
FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and
qualied in pool equipment by the jurisdiction in which the product will be installed where such state or local
requirements exist. The maintainer must be a professional with su󰀩cient experience in pool equipment
installation and maintenance so that all of the instructions in this manual can be followed exactly. Improper
installation and/or operation can create dangerous high pressure which can cause a catastrophic product failure
and/or cause the multiport valve to be blown o󰀨 possibly causing death, serious injury or property damage.
DO NOT MODIFY THIS EQUIPMENT.
Before installing this product, read and follow all warning notices and instructions that accompany
this product. Failure to follow warning notices and instructions may result in death, serious injury or
property damage. Consult Polaris customer service at 1-800-822-7933 for assistance.
Improper installation and/or operation may void the warranty.
Above Ground Sand Filter
PAG19SF, PAG22SF
Owner’s Manual
ENGLISH | FRANÇAIS | ESPAÑOL

Polaris PRESTIGE PAG19SF Specifications

General

Brand	Polaris
Model	PRESTIGE PAG19SF
Category	Water Filtration Systems
Language	English

Summary

Important Safety Instructions

WARNING: Maximum Operating Pressure

Maximum operating pressure is 35 PSI. Avoid exceeding this limit to prevent failure.

Electrical Shock Hazards

Details on avoiding electrical shock when working with the system, including proper shutdown.

CAUTION: Operational Guidelines

Notes on pressure gauge, vacuum levels, waste disposal, and protecting laterals during sand addition.

Package Contents

Required ToolsEquipment

Lists necessary tools and safety equipment for the proper installation of the filter system.

Equipment Location

Equipment Pad

Guidelines for selecting and preparing a suitable, level location for the filter and associated equipment.

Filter Location

Specific positioning requirements for the filter on the equipment pad, including safety clearances.

Initial Setup

System Pack Installation

Steps for installing the main filter unit onto its base, ensuring proper alignment and stability.

Install Hub and Laterals

Instructions for assembling and installing the internal hub and lateral pipe system within the filter tank.

Fill With Sand

Procedure for correctly filling the filter tank with the specified type and amount of filter sand.

Assemble Multi-port Valve

Steps for assembling the multiport valve, including pressure gauge installation and sealing.

Install Multi-port Valve

Instructions for attaching the assembled multiport valve to the filter tank using the clamp.

Plumbing

Operation

Filter Valve Functions

Explanation of the different functions of the multiport valve and their operational use.

Initial Start up

Step-by-step guide for the initial startup procedure of the filter system after installation.

Operating Pressure

Information on monitoring and maintaining safe operating pressure for the filter during use.

Changing the Filter Sand

Procedure for removing and replacing the filter sand when it becomes ineffective or clogged.

Winterizing

Instructions for preparing the filter system for winter storage to prevent damage from freezing.

Specifications