HEADLIGHT ADJUSTMENT
The headlight beams are adjustable.
1. Place the vehicle on a level surface with the headlight approximately 25 ft.
(7.6 m)
w
from a wall.
ITEM DESCRIPTION
q
Measure Distance = 7.5 in (19.0 cm)
w
Measure Distance = 25 ft (7.6 m)
e
Headlight Center of Bulb
2. Measure the distance from the floor to the center of the headlight and make a
mark on the wall at the same height.
3. With the machine in PARK, start the engine and turn the headlight switch to
the LOW position.
4. The most intense part of the LOW beam headlight beam should be aimed 7.5
in (19.0 cm)
q
below the mark placed on the wall.
NOTE
Rider weight must be included in the seat while performing this procedure.
131
MAINTENANCE
To Next Page
Loading...
