5. Install the clutch cover into wheel well by installing the top half first, then the
bottom half over the suspension.
NOTE
Use care when installing the clutch cover. Do not damage cover, intake boot, or
electrical harness.
6. Install and torque the outer clutch cover bolts
q
to specification.
TORQUE
PVT Outer Cover Fasteners: 44 in-lbs (5 N·m)
VEHICLE IMMERSION
WARNING
If your vehicle becomes immersed, major engine damage can result if the
machine is not thoroughly inspected. Take the vehicle in for service before
starting the engine. Your POLARIS dealer can provide this service.
If it's impossible to take your RANGER to a dealer before starting it, follow the
steps outlined below:
1. Move the vehicle to dry land or at the very least, to water below the footrests.
2. Dry any water present in the air box. Filter replacement is required if water is
present.
3. Remove the spark plugs. Turn the engine over several times using the
electric start.
112
MAINTENANCE
To Next Page
Loading...
