FOOT PEDALS
BRAKE PEDAL
Depress the brake pedal
q
to slow or stop the vehicle. Apply the brakes while
starting the engine.
When the brake pedal is depressed, the brake light comes on. Check the brake
light before each ride.
1. Turn the ignition switch to the ON position.
2. Apply the brakes. The brake light should come on after about 10 mm (0.4 in.)
of pedal travel.
THROTTLE PEDAL
Push the throttle pedal
w
down to increase engine speed. Spring pressure
returns the pedal to the rest position when released. Always check that the
throttle pedal returns normally before starting the engine.
TIP
If the throttle pedal and brake pedal are applied simultaneously, engine power
may be limited.
49
FEATURES AND CONTROLS
To Next Page
Loading...
