SECURING THE NET
1. Position the lower net rod into the mount at floor level.
2. Connect the latch at the top edge of the net to the receiver latch mounted on
the front frame.
OPENING THE NET
1. To exit the vehicle, release the top front latch.
2. Rotate the net rearward and slide the lower net rod out of the mount to
remove it.
3. Allow the net to hang freely outside the vehicle while dismounting.
ROLLOVER PROTECTIVE STRUCTURE (ROPS)
The Rollover Protective Structure (ROPS) on this vehicle meets OSHA®
1928.53 rollover performance requirements. Always have your authorized
dealer thoroughly inspect the ROPS if it ever becomes damaged in any way.
No device can assure occupant protection in the event of a rollover. Always
follow all safe operating practices outlined in this manual to avoid vehicle
rollover.
WARNING
Vehicle rollover could cause severe injury or death. Always avoid operating in
a manner that could result in vehicle rollover.
HOOD LATCHES
To remove the hood, rotate the hood
latches
q
1/4-turn and lift the hood
away from the vehicle.
57
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
