ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKS
HOURS CLNDR
KM
(MILES)
XU
Seat Adjuster
Lubrication
50 H
Monthly 800 (500)
Lubricate long threaded bolt and
all pivot pins
XU General Lubrication 50 H 3 M
800 (500)
Lubricate all fittings, pivots,
cables, etc.
XU Air Filter 50 H 6 M
800 (500)
Inspect (visually – do not
remove unless replacement is
needed); replace as needed
Engine Breather
50 H 6 M
800 (500) Inspect; replace as needed
Shift Linkage
50 H 6 M
800 (500) Inspect, lubricate, adjust
D
Steering
50 H 6 M
800 (500)
Lubricate
XU
Front / Rear
Stabilizer Bars
50 H 6 M
800 (500) Lubricate and inspect bushings
D Throttle Pedal 50 H 6 M
800 (500)
Inspect; adjust; replace as
needed
Throttle Body Intake
Ducts/Flange
50 H 6 M
800 (500)
Inspect duct for proper sealing/
air leaks
Cooling System
50 H 6 M
800 (500)
Inspect coolant strength
seasonally; pressure test
system yearly
XU
Cooling Hoses
50 H 6 M
800 (500) Inspect for leaks
XU Radiator 50 H 6 M
800 (500) Inspect; clean external surfaces
XU
Engine Oil Lines/
Fasteners
50 H 6 M
1600
(1000)
Inspect for leaks and loose
fittings
Drive Belt 100 H 12 M
1600
(1000)
Inspect; replace as needed
XU
Front Gearcase Fluid
(Demand Drive)
100 H 12 M
1600
(1000)
Change fluid
XU
Transmission Fluid
(AGL)
100 H 12 M
1600
(1000)
Change fluid
D
Fuel System
100 H 12 M
1600
(1000)
Check for leaks at tank cap,
lines, filter, pump, throttle body,
replace if necessary
XU
Engine Mounts
100 H 12 M
1600
(1000)
Inspect, torque to specification;
replace if necessary
99
MAINTENANCE
Downloaded from ManualsNet.com search engine