24
FEATURES AND CONTROLS
Seat Belts
This Polaris vehicle is equipped with
three-point lap and diagonal seat belts for
the operator and passenger. Always make
sure the seat belts are secured for all rid-
ers before operating.
The center of the seat is NOT equipped
with a seat belt. Never allow a passenger
to ride between the operator and passen-
ger seats.
WARNING! Falling from a moving vehicle
could result in serious injury or death. Always
fasten your seat belt securely before
operating or riding in the RANGER.
To wear the seat belt properly, follow this
procedure:
1. For 3-point belts, pull the seat belt
latch downward and across your
chest toward the buckle at the inner
edge of the seat. The belt should fit
snugly across your hips and diago-
nally across your chest. Make sure
the belt is not twisted.
2. Push the latch plate into the buckle until it clicks.
3. Release the strap, it will self tighten.
4. To release the seat belt, press the square red button in the buckle's
center.
To Next Page
Loading...
Need help?
General
