29
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 23
78
Brake fluid Ensure proper level 78
Park gear Ensure vehicle does not roll when in
PARK. Ensure PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 53
Rear suspension Inspect, lubricate if necessary 53
Steering Ensure free operation 79
Tires Inspect condition and pressure 7
81
Wheels/fasteners Inspect, ensure fastener tightness 81
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 26
55
Coolant level Ensure proper level 66
67
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 76
Indicator lights/switches Ensure operation 20
Air filter, pre-filter Inspect, clean 71
Air box sediment tube Drain deposits whenever visible 71
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
83
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
85
Seat Belts Check length of belt for damage,
check latches for proper operation
25
To Next Page
Loading...
Need help?
General
