75
MAINTENANCE
Cooling System
Radiator Coolant Level
1. Lift the hood.
CAUTION! Escaping steam
can cause burns. Never
remove the pressure cap while
the engine is warm or hot.
Always allow the engine to
cool before removing the
pressure cap.
2. Slowly remove the
radiator cap.
3. View the coolant level
through the opening.
4. Use a funnel and
slowly add coolant as needed.
Tip: This procedure is required only if the cooling system has been drained for
maintenance and/or repair. But if the overflow bottle has run dry, the level in
the radiator should also be inspected.
5. Reinstall the pressure cap. Use of a non-standard pressure cap will
not allow the recovery system to function properly. See your dealer
for the correct replacement part.
Power Steering Unit
If your model is equipped with
power steering, frequently clean
the areas around and on the power
steering unit to allow proper cool-
ing. Clean these areas thoroughly.
To Next Page
Loading...
