41
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 26
84
Brake fluid Ensure proper level 84
Front suspension Inspect, lubricate if necessary 61
Rear suspension Inspect, lubricate if necessary 61
Steering Ensure free operation 86
Tires Inspect condition and pressure 88
Wheels/fasteners Inspect, ensure fastener tightness 88
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 35
63
Coolant level Ensure proper level 74
75
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 82
Indicator lights/switches Ensure operation 24
Air filter, pre-filter Inspect, clean 79
Air box sediment tube Drain deposits whenever visible 79
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
90
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
90
Seat Belts Check length of belt for damage,
check latches for proper operation
31
Cab Nets Check for wear or damage, ensure
proper installation
29
To Next Page
Loading...
Need help?
General
