31
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 22
67
Brake fluid Ensure proper level 67
Front suspension Inspect, lubricate if necessary 53
Rear suspension Inspect, lubricate if necessary 53
Steering Ensure free operation 68
Tires Inspect condition and pressure 69
Wheels/fasteners Inspect, ensure fastener tightness 69
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 35
54
Coolant level Ensure proper level 60
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 66
Indicator lights/switches Ensure operation 18
Air filter, pre-filter Inspect, clean 64
Air box sediment tube Drain deposits whenever visible 64
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
71
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
70
Seat Belts Check length of belt for damage, check latches for
proper operation
25
Cab Nets Check for wear or damage, ensure proper installation 23
To Next Page
Loading...
Need help?
General
