42
OPERATION
New Operator Driving Procedures
1. Read and understand the owner's manual and all warning and
instruction labels before operating this vehicle.
2. Watch the instructional video with the supervising adult.
3. Review the section of this owner’s manual about starting the engine,
stopping the engine, braking and parking (pages 40-41).
4. Perform the pre-ride inspection (page 38).
5. Wear a helmet, eye protection, gloves, long-sleeve shirt, long pants
and over-the-ankle boots.
6. Select a level open area to practice driving. Make sure you have
adult supervision and permission to drive in this area.
7. Sit in the driver's seat and fasten the seat belt.
8. Do not operate or ride in this
vehicle if the clearance between
the top of your helmet and the
overhead cab frame is less than
2 inches (5 cm).
(continued on next page)
To Next Page
Loading...
