HEADLIGHT BEAM ADJUSTMENT
To adjust the headlight beam, do the following:
1. Place the vehicle on a level surface with the headlight approximately 7.6 m (
25 ft) from a wall.
2. Measure the distance from the floor to the center of the headlight and make a
mark on the wall at the same height.
3. Apply the brakes. Start the engine. Turn on the headlights.
4. Observe the headlight aim. The most intense part of the headlight beam
should be aimed 20 cm (8") below the mark placed on the wall. Include the
weight of a rider on the seat while performing this step.
137
MAINTENANCE
To Next Page
Loading...
Need help?
General
